BENEFITS OF MSE RUBBERISED FILTER PRESSES

  • Protection against aggressive suspensions
  • Protection against corrosion
  • Long life span
  • Easy cleaning
  • Meet the special standards in the chemical industry

RUBBERIZED FILTER PRESS

On the one hand, rubberised filter presses differ only slightly from conventional filter presses. The basic architecture, the filtration principle and process technology are identical. However, they differ in their surface properties. Based on the decisive properties of the flexible material, the rubberised filter press is mainly used for the filtration of particularly aggressive suspensions and environments. The aggressive suspensions include, for example, solvents or acids.  In this context, the conventional painting of the steel parts is no longer sufficient.

 

THE RUBBERIZED FILTER PRESS OF MSE AS PROTECTIVE MEASURES AGAINST AGGRESSIVE SUSPENSIONS

 

In a complex process, the load-bearing filter press components are coated with a layer of 3mm thick plastic. In the case of the rubberised filter press, the hydraulic stands, feed stand, pressure plate and supporting beams are hard rubberised and the smaller components are made of polypropylene. It is also possible to rubberise only the components in contact with the product, such as the feed stand and the pressure plate. The composition of the rubber coating depends on the special surface requirements of our customers.

OPTIONAL MACHINE EQUIPMENT

automatic plate shifter for filter press - working principle

The automatic plate shifter has the task of moving the individual filter plates or the filter plates connected to form a package for discharging the filter press. Experience has shown that this is done manually for smaller filter presses. With larger plate sizes, however, plate shifting is more difficult and requires a plate shifting system. This system makes handling much easier.

>> Learn More

swivel plate - bombay doors - working principle

The swivel plate / drip plate for filter presses is used in automatic or manual design primarily to catch the filtrate escaping from the filter plates during filtration and thereby ensure controlled drainage of the dripping water into the filtrate discharge chute. These prevent drops from reaching conveyor belts or cake waste containers. The respective drip plates are mounted below the plate pack. Furthermore, the closed drip plates specifically drain off the cleaning water when cleaning the filter plates and filter cloths in the press. To empty the filter press, the drip plates must be swung open (automatically) / removed (manually) to expose the discharge chute for the filter cake.

>> Learn More

filter cloth cleaning device for filter press - working principle

MSE Filter Presses‘ industry-leading Filter Cloth Washing System is a device that uses PLC to ensure fully automatic cleaning of filter cloths without operator intervention. Cleaning is accomplished with water sprayed at high pressure onto the surface of the filter cloths. The automatically operating high pressure filter cloth cleaning system for periodic cleaning of soiled filter cloths offers the following advantages:

  • The filter press works more efficiently while maintaining the good condition of the filter cloths and requiring less operator effort
  • The service life of the filter cloths can be significantly extended under certain circumstances
  • The cloths are cleaned automatically without supervision, e.g. even at weekends or at night, during downtimes

>> Learn More

filter cloth acidification for filter press - chemical filter cloth cleaning - working principle

Filter cake funnels are installed between the filter press, the platform, and the desired transfer point. This serves, for example, in combination with a conveyor for the targeted discharge of the filter cake for gravimetric filling in so-called Big Bag Filling Stations. If desired, filter cake hoppers can be provided with a maintenance opening on the front side.

>> Learn More

vibrating device II - filter cake release aid for filter press - working principle

The vibrating device is used for fully automatic emptying of filter presses and is a consistent further development of the MSE Filterpressen® plate shifting system, which is known as robust. This system consists of:

  • Filter cake discharge aid by vibrating device, integrated in knife gate valve.
  • Tried-and-tested modular basic system for plate shifting
  • Individual emptying of the chambers
  • Hydraulic lifting device that transmits lifting pulses to the filter plate with adhering filter cake
  • A preconfigured active anti-sway device

Advantages:

  • The operator himself can optimally adapt the mode of operation of the shaking device to the respective application with just a few parameters
  • This always ensures the shortest possible emptying time
  • Advantages of a fully automatic filter press at comparatively low investment costs

>> Learn More

working principle of a membrane filter press with squeezing unit

Filter presses greatly influence the degree of dryness of the solids through the use of membrane technology in the filter plates. In this process, a flexible, impermeable membrane attached to the carrier body compresses the cake in the chamber after the feeding process is completed. Depending on the degree of dewatering, different dry substance contents (dry substance content – percentage by weight of dry substance in the filter cake) can be achieved in the filter cake by re-pressing with membrane plates.

>> Learn More

filter cake washing - working principle

Filter cake washing, especially in combination with membrane technology, is an optional process step in filter cake post-treatment. This involves chemical/physical treatment of the filter cake or replacement of the filtrate still contained in the filter cake by a washing medium. The dewatering properties of the suspension determine the required filtration or washing pressure. In addition, the maximum permissible pressure depends on the following factors:

  • On the permissible operating pressure of the press frame.
  • From the permissible pressure and temperature stress on the membrane filter elements

>> Learn More

core blowing and core rinsing - working principle

In a wide variety of filtration applications, filter cake may not be able to form completely in the turbidity channel (in the inlet area of the filter plates). Whereas in other applications, e.g. fully automatic filter presses, a solid filter cake in the turbidity channel is not desired. If a liquid slurry remains in the turbidity channel after filtration without core blowing, it escapes when the plate pack is opened, which can cause correspondingly serious problems. Soiled filter cloths or deposits on the lower edge of the filter plates are just a few of the undesirable effects. Poor filtration results and high mechanical loads for the fiter press are the consequences.

>> Learn More

filter cake blow drying - working pronciple

Residual liquid in the finished filter cake and between the filter cake and filter cloth can never be completely excluded. This results in high and unnecessary disposal and transport costs. The filter cake is dried by compressed air. The compressed air from the pressure plate shoots through the filter cake to the washing plates. The residual water runs off via filtrate drains provided for this purpose. The compressed air forces part of the capillary water out of the filter cake. In this connection, the capillary water adhering between the filter cloth and the filter cake is reduced. This consequently leads to an improvement in the dissolving behavior and the dry substance content (DS content) in the filter cake.

>> Learn More

The MSE 2FAST unloading technology significantly reduces the cycle times of the filter press. The unmanned high-speed unloading process results in a faster restart of filtration and thus increases the productivity of the machine.

FAST OPENING/CLOSING OF THE FILTER PRESS

  • Special design of the hydraulic unit of the filter press, which ensures the following:
  • Automatic electro-hydraulically controlled fast opening/closing of the filter press.
  • Minimization of unproductive dead time during unloading of the filter press -> low delay.
  • The fast opening/closing principle results in shorter cycle times as well as lower operating costs
  • Optimized control philosophy for simultaneous operation of the individual functions
  • Low maintenance requirements

With the versatile applications of a chamber filter press as well as membrane filter press, breakthroughs of the slurry can occur from time to time. To keep contamination of the environment as minimal as possible as a result, there are various options. In addition to a splash guard, a preliminary leakage test is used to check the filter plate package for leaks and preventively minimize damage. How does this work? Contact us!

Filter press platforms incl. hopper and conveyor belt

MSE Filterpressen® offers the possibility to increase the height of your filter presses by means of individually adapted rack devices (platforms). Depending on the requirements of the location, various modifications to the height of a filter press are possible. The option of placing the filter press on a platform enables the filter cake discharge to be transported either directly into a skip trailer/container or via conveyor belts to more distant locations. Other conveying technologies such as spiral screw conveyors or trough chain conveyors are also part of the conveying systems used.

>> Learn More

Extension of the filter press with a spacer

The removable spacer is the ideal solution if you want to secure the possibility of expanding the capacity of your filter press in the future. In doing so, you are spared the need for another new purchase. Each new filter press is optionally and upon request expandable with a spacer for future plate expansions. If a larger capacity intake is required, the cylindrical spacer, which is attached to the hydraulic cylinder and the moving pressure plate, can be removed quickly and easily. The filter press can thus be supplemented by the additional filter plates. However, the maximum capacity expansion depends on the filter press architecture. We will be happy to advise you on this.

>> Learn More

Safety engineering filter presses

According to the „Test Laws for Chamber Filter Presses“, a filter press must be secured or made inaccessible not only on the operating side (by means of a safety light grid), but also on the rear side (safety technology for filter presses). Exceptions are non-automated filter presses of simple design, which, for example, do not have a plate transport for automatic filter plate displacement. These filter presses are designed with a 2-hand control, which precludes intervention while the hydraulics are working. In addition, MSE filter presses are equipped with an intervention protection at danger points (above and below the uprights).

For the protection there are 5 different basic variants:

  1. Safety light grid short incl. rear tread protection
  2. Safety light curtain long without rear guard
  3. Monitored sliding door
  4. Monitored automatic rolling door
  5. Monitored safety door

>> Learn More

>> Learn More

drip-proof filter plates for filter presses

Drip-proof filter plates (CGR) are used in particular when the filter chambers must have a particularly high degree of tightness during the filtration cycle. For this purpose, the filter plates are available with a variety of sealing materials such as EPDM, silicone, NBR, and FKM, depending on the resistance requirements and individual customer needs.

>> Learn More

Conveyor belt for filter press

For filter cake transport, driven conveyor systems such as belt conveyors, screw conveyors or trough chain conveyors with hoppers can be used, which are adapted and connected directly under the filter press (erected on a platform). The discharged filter cake is thus transported directly to the corresponding storage. A distance of more than 60 meters in length and 10 meters in height can easily be realized. Depending on the customer’s requirements and the conveying task, it is possible to convey the filter cake horizontally, uphill or vertically. In addition, refinements or special designs, e.g. according to ATEX directives, are possible.

>> Learn More

Filter press controls

MSE’s filter press and plant controls are as individual as their filtration tasks. In addition to our standards, we offer electrical equipment and control systems tailored to your requirements. In all aspects, from the storage of your spare parts to the control technology and the level of knowledge of your personnel in maintenance, we adapt our technology to yours for this purpose.

Control systems:

  • ABB
  • Allen-Bradley
  • Rockwell
  • Schneider
  • Siemens SIMATIC-S7

>> Learn More

feeding pump for filter press emmerich

Feed pumps have the task of filling the chambers of the closed plate pack with a slurry and thus „feeding“ the filter press for filtration. MSE Filterpressen® relies on an intensive partnership with well-known pump manufacturers. The close cooperation results in innovative solutions with which MSE distinguishes itself from the pure spare parts market through excellent quality – and this for 40 years now.

>> Learn More

Funnel for filter press

Filter cake funnels are installed between the filter press, the platform, and the desired transfer point. This serves, for example, in combination with a conveyor for the targeted discharge of the filter cake for gravimetric filling in so-called Big Bag Filling Stations. If desired, filter cake hoppers can be provided with a maintenance opening on the front side.

FILTER PRESS PRE-LAYOUT

 

Calculate the size of your chamber filter press with our online calculator. This service will assist you in planning and sizing your filter press machine. Please note that this result is an estimated value based on solid-liquid separation. We will be pleased to support you with your detailed calculation of your dewatering plant. Please contact us for more.

REQUEST A QUOTE

 

Are you interested in one of our unique and tailor-made filter presses? Would you like to receive further information on the design?

Then please contact us! Our experts will be glad to assist!

PRODUCT CATALOG FILTER PRESSES

product catalog MSE Filterpressen GmbH - EN

EN

SEE MORE

MSE Filterpressen automation modules
AUTOMATION MODULES

With the automation & expansion modules, we offer our customers advanced solutions to increase the productivity and flexibility of your filter press. From this, MSE generates custom-fit and tailor-made solutions – from the single machine to the fully automated turnkey filtration system.

MSE Filterpressen Service
MSE SERVICES

MSE Services offers you a comprehensive range of transparent and clearly structured services for your filter press system. As a reliable service partner, we accompany you throughout the entire life cycle of your system and ensure its productivity and availability.

function process technology filter presses
PROCESS TECHNOLOGY

Cake filtration is a mechanical process for the separation of solid-containing liquids. It pertains to surface filtration like cross-flow filtration. In contrast to depth filters, the actual separation effect takes place through the filter cake, which settles on the filter cloth.