CONEC D-SUB Combination connectors
...Proven design – new functionality
A choice can be made between the Combination D-SUB, Combination D-SUB High Density and Combination D-SUB Dual Port series.
The connectors are always supplied with signal contacts, except for the crimp version. The high-current, high-voltage and coaxial contacts can be ordered separately or can be mounted in the connector at the factory.
With five shell sizes and possible pin combinations of high voltage, power and co-axial CONEC´s D-SUB Combination connectors offer more flexibility than other solutions on the market. For example, this also allows faster connect/disconnect for applications requiring multiple RF connections.
Technical details:
• Power with current ratings up to 40 amps
• Coax in 50 or 75 ohms
• High Voltage contacts for ratings up to 2,8 kV
Included configurations are:
• No hardware, flange has thru holes, typically used in a hood for the cable end
• Flange threads in 4-40 or M3
• Standoffs for straight PCB mounting with or without boardlock clips
• Right angle bracket with mounting hole locations in accordance with the footprint chosen.
The connectors are available in two variants:
Advantages:
|
Fields of application:
|